Miller Electric OM-4409 User Manual download pdf (Page 44)

OM-4409 Page 40

8-3. Battery Charge Cable Connections

! Stop engine.

! Do not charge or jump start a battery

which has loose terminals or one

showing damage such as a cracked

case or cover.

! Have only qualified persons do bat-

tery charging work.

! Keep cables away from moving

parts.

! Do not use damaged cables.

! Be sure charger output voltage

matches battery voltage.

! Read BCI Battery Service Manual

before charging or jump starting.

 Before connecting to battery, place

Output Selector switch in position

matching voltage of battery being

charged.

1 Battery

2 Battery Charging Cables

For battery charging, use less than 20 feet

(6.1 m) of AWG #1 or larger cable. For jump

starting, use less than 20 feet (6.1 m) of

AWG 2/0 or larger cable.

3 Terminal Lug

Use lugs of proper amperage capacity and

hole size for connecting to charge output

terminals.

Install suitable connectors on remaining

ends of battery cables.

4 Battery Charge Positive (+) Output

Terminal

5 Battery Charge Negative (−) Output

Terminal

 Connect charging cables to battery

charge output terminals before con-

necting to battery terminals.

Connect Battery Charge Positive (+) cable

to battery positive (+) terminal, and battery

Charge Negative (−) cable to battery nega-

tive (−) terminal.

803 231-A / 210 156 / Ref. S-0714 / Ref. S-0756

1

3

2

−

+

4

5

1 ... 43 44 45 ... 102

Comments to this Manuals

No comments