Miller Electric OM-4409 User Manual download pdf (Page 27)

OM-4409 Page 23

5-2. Mounting Welding Generator

Tools Needed:

9/16 in

2

2

4

Welding Unit In Place

Bolting Unit In Place

! Do not weld on base. Weld-

ing on base can cause fuel

tank fire or explosion. Weld

only on the four mounting

brackets or bolt unit down.

! Do not mount unit by sup-

porting the base only at the

four mounting brackets.

Use cross-supports to ade-

quately support unit and pre-

vent damage to base.

Mounting Surface:

1 Cross-Supports

2 Mounting Brackets (Supplied)

Mount unit on flat surface or use

cross-supports to support base.

Secure unit with mounting brack-

ets.

3 1/2 in Bolt And Washer

(Minimum − Not Supplied)

4 3/8-16 x 1 in Screws

(Supplied)

To Bolt Unit In Place:

Remove hardware securing the

four mounting brackets to the base.

Reverse brackets and reattach to

base with original hardware.

Mount unit to truck or trailer with 1/2

in (12 mm) or larger hardware (not

supplied).

To Weld Unit In Place:

Weld unit to truck or trailer only at

the four mounting brackets.

1

Inadequate support.

2

Supporting The Unit

Using Mounting Brackets

install3 8/06 803 274 / 200 864-A / 803 602

! Do not use flexible mounts.

1

OR

3

1 ... 26 27 28 ... 102

Comments to this Manuals

No comments