Miller-electric Blue Star 6000 User Manual download pdf (Page 19)

OM-499 Page 15

Return To Table Of Contents

5-3. Grounding Generator When Supplying Building Systems

GND/PE

1 2

Use ground device as

stated in electrical codes.

2

3

800 576-B

1 Equipment Grounding

Terminal

2 Grounding Cable

Use #10 AWG or larger insulated

copper wire.

3 Ground Device

 Ground generator to sys-

tem earth ground if supply-

ing power to a premises

(home, shop, farm) wiring

system.

5

-4. Engine Prestart Checks (Kohler-Powered Units)

802 511-A

Full

Full

Gasoline

1/2 in

(13 mm)

 Follow run-in procedure in engine

manual.

Check all fluids daily. Engine must be

cold and on a level surface. Unit is

shipped with 10W30 engine oil.

Engine stops if oil level gets too low.

 This unit has a low oil level shut-

down switch. However, some con-

ditions may cause engine damage

before the engine shuts down.

Check oil level often and do not use

the oil level shutdown system to

monitor oil level.

1 Fuel Valve

Open valve by turning lever to vertical

position.

 Close fuel valve before moving unit

or carburetor may flood and make

starting difficult.

Fuel

Add fresh fuel before starting engine the

first time (see maintenance label for

specifications). Fill fuel tank up to 1/2 in.

(13 mm) from top to allow room for ex-

pansion. Check fuel level on a cold en-

gine before use each day.

Oil

After fueling, check oil with unit on level

surface. If oil is not up to full mark on dip-

stick, add oil (see maintenance label).

 To improve cold weather starting:

Keep battery in good condition.

Store battery in warm area.

Use correct grade oil for cold

weather.

Open

1

Closed

Closed

1 ... 18 19 20 ... 60

Comments to this Manuals

No comments