Miller Electric 1251 User Manual download pdf

ILLER Electric has replaced its

Spectrum 1250 air plasma cutter

with the 1251, a machine that

packs additional performance into a 97-

pound package, compared with the ear-

lier model’s 416 pounds.

Designed for handheld and auto-

mated cutting, the new Spectrum 1251

cutting and gouging system has a 100-

amp output, can sever 1¾-inch steel

and has a rated cutting capacity of 1¼

inches. On thinner material, cutting

speed increases.

The Spectrum 1251 cuts ¾-inch steel

at 25 inches per minute, ⁵⁄₈-inch steel

at 40 IPM and ¼-inch steel at almost

140 IPM. It also cuts stainless steel,

aluminum, copper and any metal that

conducts electricity. In many applica-

tions, the plasma process can improve

productivity and cut quality compared

to oxy-fuel cutting or sawing.

“With the introduction of the

Spectrum 1251, Miller now provides

a complete family of inverter-based

plasma products for applications re-

quiring 100 amps or less of cutting

power,” says Steve Hidden, Miller

product manager. In addition to cutting,

Miller puts more power

into a lighter package

Key Points

■ Miller Electric’s Spectrum 1251 is able

to cut 1¾-inch steel.

■ The new air plasma cutter weighs less

than 100 pounds.

■ Auto-Line technology uses any

alternating-current feed.

MILLER ELECTRIC’S new Spectrum

1251 air plasma cutter weighs 75% less

than the previous model and runs on

any alternating-current supply with little

change in efﬁ ciency.

the Spectrum 1251 provides superior

gouging capabilities, such as for re-

moving old welds and preparing joints,

because it produces an extremely long

gouging arc for hard-to-reach, heavy ap-

plications. Plasma-arc gouging produces

less dust, smoke and other harmful en-

vironmental hazards compared with

carbon-arc gouging.

The new model also boasts increased

ﬂ exibility with Auto-Line power man-

agement technology. Auto-Line enables

simple, direct connection to any 50- or

60-hertz, single- or three-phase primary

power level from 190 to 630 VAC, en-

abling the Spectrum 1251 to operate in

any situation anywhere in the world.

Other new features include Auto-

Reﬁ re Technology, which automatically

controls the pilot arc when cutting ex-

panded metal or multiple

pieces of metal, saving on

costs by preserving consum-

ables. Auto-Reﬁ re switches

the pilot arc (to initiate the

cutter arc) on or off as fast as

necessary, and it automatically

provides maximum power for cut-

ting thicker or hardened metals. The

automatic retriggering action reduces

user hand fatigue.

The Spectrum 1251 is equipped

with two exclusive Miller fea-

tures: Wind Tunnel Technology

and Fan-On-Demand, which

increase productivity by re-

ducing maintenance and down-

time. Wind Tunnel Technology

allows airborne contaminants to

ﬂ ow through a center channel instead

of through the unit’s internal compo-

nents, preventing damage from abrasive

dust and particles. The Fan-On-Demand

cooling system only operates when

needed. In dirty or dusty environments,

it reduces the amount of airborne con-

taminants pulled through the machine,

keeping internal components cleaner

and reducing maintenance.

■ Check out www.millerwelds.com,

or call (800) 426-4553.

Whatever the task, Wheatheart

has a model to suit your need.

Wheatheart offers you a complete line of

fencing equipment that’s designed to make

your fencing jobs safe, fast and efficient!

Put posts exactly where you want them!

Fencing Equipment Built Tough to Take It!

Operating a post pounder is made is easy with conveniently

located joystick controls. You can direct the four way tilt mast

equipped with a post hugger for perfect post alignment

For full specs and details visit our website at www.wheatheart.com

A division of Ag Growth Industries L.P.

3455 Idylwyld Drive, N.

Saskatoon, Saskatchewan S7L 6B5

Toll Free 1- 877-934-0649

Ph (306) 934-0611

Fax (306) 934-6020

Wheatheart Manufacturing

every time. Drive wood or steel post up to 12 in diameter

into hard ground. Wheatheart Post Pounders are heavy

duty and hard hitting!

Available in 3 point hitch mount, versatile trailer models

and skid steer mount. Quality and performance

you expect from a Wheatheart post pounder!

ALSO AVAILABLE

■

Universal Mount Post Hole Auger with quick-attach

■

Compact Post Hole Auger – ideal for tractors under 45hp

TECHNOLOGY

Missouri Ruralist - April 2006 23

Miller puts more power 1

Summary of Contents

Page 1 - Miller puts more power

MILLER Electric has replaced its Spectrum 1250 air plasma cutter with the 1251, a machine that packs additional performance into a 97-pound package, c

Miller Electric 1251 User Manual

Browse online or download User Manual for Welding System Miller Electric 1251. Miller puts more power into a lighter package

Summary of Contents

More documents for Welding System Miller Electric 1251

Comments to this Manuals

Miller Electric 1251 User Manual

Browse online or download User Manual for Welding System Miller Electric 1251. Miller puts more power into a lighter package

Summary of Contents

More documents for Welding System Miller Electric 1251

Comments to this Manuals

Related products and manuals for Welding System Miller Electric 1251