Miller Electric XR W User Manual download pdf (Page 14)

OM-1581 Page 10

SECTION 4 − INSTALLATION

Be sure that contact tip, liner, and drive rolls are correct for wire size and type. See

Section 5 to change parts as needed. See Section 7 for list of other available

contact tips.

NOTE

Review Section 4-1 through Section 4-4 to determine how equipment will be connected. Air-cooled models are shown

in Section 4-1 through Section 4-4. For water-cooled models, supplied water hoses must be connected from wire feed-

er to coolant supply.

Read entire Section 4 before installing equipment.

4-1. Connections With A CC, CV Or CC/CV Voltage Welding Power Source Having A

14-Socket Receptacle

1 Constant Current (CC),

Constant Voltage (CV) Or

Constant Current/Constant

Voltage (CC/CV) Welding

Power Source

2 115 VAC/Contactor Control

14-Pin Plug

3 Workpiece

4 Voltage Sensing Lead

Connect lead to workpiece for CC

welding only.

5 Gun

6 Wire Feeder

7 115 VAC/Contactor Control

Cord

8 Gas Cylinder

151 774-F

1 ... 13 14 15 ... 60

No comments

Miller Electric XR W User Manual Page 14