Miller Electric Maxstar 200 STR Owner's Manual download pdf (Page 25)

OM-2233 Page 19

4-7. Weld Output Terminals And Selecting Cable Sizes*

NOTICE − The Total Cable Length in Weld Circuit (see table below) is the combined length of both weld cables. For example, if the power source is

100 ft (30 m) from the workpiece, the total cable length in the weld circuit is 200 ft (2 cables x 100 ft). Use the 200 ft (60 m) column to determine cable

size.

Weld Cable Size** and Total Cable (Copper) Length in Weld Circuit

Not Exceeding

100 ft (30 m) Or Less

150 ft

(45 m)

200 ft

(60 m)

250 ft

(70 m)

300 ft

(90 m)

350 ft

(105 m)

400 ft

(120 m)

Weld Output

Terminals

Welding

Amperes***

10 − 60%

Duty

Cycle

60 − 100%

Duty

Cycle

10 − 100% Duty Cycle

Output Receptacles

−

! Turn off power before

connecting to weld out-

put terminals.

! Do not use worn,

damaged, under-

sized, or poorly

spliced cables.

100 4 (20) 4 (20) 4 (20) 3 (30) 2 (35) 1 (50) 1/0 (60) 1/0 (60)

150 3 (30) 3 (30) 2 (35) 1 (50) 1/0 (60) 2/0 (70) 3/0 (95 3/0 (95)

200 3 (30) 2 (35) 1 (50) 1/0 (60) 2/0 (70) 3/0 (95) 4/0 (120) 4/0 (120)

* This chart is a general guideline and may not suit all applications. If cable overheats, use next size larger cable.

**Weld cable size (AWG) is based on either a 4 volts or less drop or a current density of at least 300 circular mils per ampere.

( ) = mm

for metric use

***Select weld cable size for pulsing application at peak amperage value. S-0007-E−

1 ... 24 25 26 ... 60

Comments to this Manuals

No comments

Miller Electric Maxstar 200 STR Owner's Manual Page 25

Comments to this Manuals

Related products and manuals for Welding System Miller Electric Maxstar 200 STR