Miller Electric 3545 Owner's Manual download pdf (Page 21)

OM-226 857 Page 17

5-2. Changing Drive Rolls

801 893-A

Tools Needed:

! Turn off and disconnect

input power.

1 Drive Roll Cover

Remove cover.

Changing Push Roll:

To remove push roll:

2 Push Roll Screw

3 Washer

4 Push Roll

Remove screw and washer, and lift

out drive roll.

To install drive roll:

Slide drive roll onto shaft and se-

cure with washer and screw.

Changing Lower Drive Roll:

To remove drive roll:

5 Lower Drive Roll Screw

6 Washer

7 Lower Drive Roll

8 Drive Roll Key

9 Drive Roll Shaft

Remove screw and washer, and lift

out drive roll. Note: drive roll key will

come out with drive roll.

To install drive roll:

Place drive roll key in slot in drive

roll shaft.

Line slot in drive roll up with drive

roll key, and slide drive roll onto

shaft.

Secure drive roll with washer and

screw.

Reinstall gun case, if applicable.

Reinstall drive roll cover.

1

2

3

4

5

6

7

8

9

It may be necessary to remove

drive roll side of gun case to

change lower drive roll.

1 ... 20 21 22 ... 32

Comments to this Manuals

No comments