Miller Electric XMT 350 CC/CV Owner's Manual download pdf (Page 19)

OM-233 865 Page 15

4-5. Remote 14 Receptacle Information

Socket* Socket Information

24 VOLTS AC

A 24 volts AC. Protected by circuit breaker CB2.

B Contact closure to A completes 24 volts AC

contactor control circuit.

115 VOLTS AC

I 115 volts AC. Protected by circuit breaker CB1.

J Contact closure to I completes 115 volts AC

contactor control circuit.

REMOTE

OUTPUT

CONTROL

C Output to remote control; 0 to +10 volts DC, +10

volts DC in MIG mode.

D Remote control circuit common.

E 0 to +10 volts DC input command signal from

remote control.

M CC/CV select

A/V

AMPERAGE

VOLTAGE

F Current feedback; +1 volt DC per 100 weld am-

peres.

H Voltage feedback; +1 volt DC per 10 weld volts.

GND

G Circuit common for 24 and 115 volts AC circuits.

K Chassis common.

*The remaining sockets are not used.

Ref. 803 879-B

1 115 V 10 Amp. AC

Receptacle

Power is shared between duplex

receptacle and Remote 14 recep-

tacle (see Section 4-5).

2 Circuit Breaker CB1

3 Circuit Breaker CB2

CB1 protects duplex receptacle

and 115 volts AC portion of Remote

14 receptacle from overload.

CB2 protects 24 volts AC portion of

Remote 14 receptacle from

overload.

Press button to reset breaker.

2 3

4-6. 115 Volts AC Duplex Receptacle And Circuit Breakers

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Comments to this Manuals

No comments

Miller Electric XMT 350 CC/CV Owner's Manual Page 19

Comments to this Manuals

Related products and manuals for Welding System Miller Electric XMT 350 CC/CV