Typical Installations for Bobcat 250
Stick (SMAW) Basic Equipment
• Four-position range switch provides fine amperage control
for typical electrode diameters (3/32, 1/8, 5/32 and 3/16 in).
• AC weld output for good arc quality with iron powder
electrodes without fighting magnetic arc blow.
• Strong auxiliary power while welding — for example, if you
are welding at 250 amps the Bobcat delivers 2200 watts of
power to run tools, lights etc.
TIG (GTAW) Basic Equipment
TIG Adapter w/Extension #195 350
• Required for Scratch Start TIG welding
Dynasty
®
200 Series
HF251D-1 #042 388
Secondary Contactor #041 969
RMLS-14 Switch #129 337
• Excellent DC TIG capabilities
• Non-critical AC TIG welding (no remote amperage control
available on the Bobcat)
MIG (GMAW) Basic Equipment
SuitCase
®
X-TREME
™
8VS #300 093
SuitCase
®
X-TREME
™
12VS #195 500
Millermatic
®
140 Auto-Set
™
#907 335
Millermatic
®
180 Auto-Set
™
#907 312
Millermatic
®
212 #907 323
Millermatic
®
DVI2
™
#907 324
• Use .035 in solid wire with 75/25 argon mixed gas for
welding down to 16 gauge steel.
• Use .045 solid wire with a minimum of 80% argon gas
for spray transfer on 1/8 in and thicker material
(flat and horizontal position).
• Millermatic machines utilize generator power.
Flux-Cored (FCAW) Basic Equipment
SuitCase
®
X-TREME
™
8VS #300 093
SuitCase
®
X-TREME
™
12VS #195 500
• 275 amps at 25 volts, 60% duty cycle (250 amps at 28 volts,
100% duty cycle). Strong output allows higher travel speeds
and deposition rates than competitive machines.
• High voltage output ratings (28 volts at 250 amps) help to
compensate for voltage drop across long weld cables.
Plasma Basic Equipment
• Spectrum
®
machines utilize generator power.
• Quality cuts with an optional Spectrum
®
plasma cutter.
• Replace heavy oxy-fuel cylinders with a lightweight, fast
and versatile Spectrum
®
plasma cutter.
• Most plasma units require a separate air source.
Aluminum MIG (GMAW) Basic Equipment
Spoolmate
™
3035 #195 016
SGA 100C #043 857
Spoolmatic
®
30A #130 831
WC-115A Control #137 546-01-1
• Excellent results from 1/8 –1/2 in thick fillet welds.
(1 pages)
(54 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals